Crypto Metal Plate Bitcoin Wallet Mnemonic Seed Phrase Backup & Recovery Trezor

Backup your Nano Ledger, Trezor or Keepkey seed phrases into Metal plate.

Supports any 12 or 24-word seed, perfect for storing your private Crypto seed

PACKAGE INCLUDES (FOR PLATE WITH STAMP)

1. 1 x 100 mm x 50 mm x 2 mm Metal plate (as per your choice)
2. 1 x Stamp Kit ( A – Z Stamp or Number stamp) as per your choice
3. 1 x 50 mm x 50 mm Steel plate ( This is to practice punch)
4. 1 x Storage Envelope
5. 2 x Tamper Sticker
6. 2 x Lemon wipes

NOTE

Titanium plate size 100 mm x 100 mm x 2mm

IMPORTANT

It is important to have a heavy hammer and use enough force so that you will have a deep punch.

HOW TO PUNCH USING (A – Z) STAMP SET

Step 1

It is recommended to practice punching on the steel plate (included) before punching the actual plate to get an idea about the force to be applied on each stamps to get a better output.

Step 2

Count the letters/numbers of the seed phrase that you have, select the stamps from the box, draw a straight line with a marker (not included) over the metal plate so that every word will be aligned perfectly.

Step 3

Wipe the metal plates and stamp (only the bottom part of stamp) with the lemon wipe included to remove dust or any other substances from it.

Step 4

Place the metal plate on Jewelers block (not included) apply a small amount of pressure on the stamp with your fingers in downward direction and tap it with the hammer (not included) select the next stamp for the corresponding letter repeat the process until each word has finished.

HOW TO PUNCH USING NUMBER STAMP SET

IMPORTANT

Only punch your BIP39 seed words correspond to numbers (ledger/trezor standard) on to the metal plate.

HOW TO PUNCH

Step 1

It is recommended to practice punching on the steel plate (included) before punching the actual plate to get an idea about the force to be applied on each stamps to get a better output.

Step 2

Select the number stamps correspond your seed word, draw a straight line with a marker (not included) over the metal plate so that every number punched will be aligned perfectly.

Step 3

Wipe the metal plate and number stamps (only the bottom part of stamp) with the lemon wipe included to remove dust or any other substances from it.

Step 4

Place the metal plate on Jewelers block (not included) apply a small amount of pressure on the stamp with your fingers in downward direction and tap it with the hammer (not included) select the next stamp for the corresponding number repeat the process until each word has finished.

PACKAGE INCLUDES (FOR PLATE WITH ETCHING PEN)

1. 1 x 100 mm x 50 mm x 2 mm Metal plate (as per your choice)
2. 1 x Electric Engraver or Etching Pen (as per your choice)
3. 1 x Storage Envelope
4. 2 x Tamper Sticker
5. 2 x Lemon wipes

NOTE

Titanium plate size 100 mm x 100 mm x 2mm

HOW TO ENGRAVE WITH ETCHING PEN

IMPORTANT

Do not etch the seed word by holding the plate with one hand and etch with the other, To make it easier, we recommend you to place it on a flat surface (Jewelers block) so that you will get a precise output.

HOW TO ENGRAVE

Step 1

It is recommended to practice etching in other surfaces before starting with the actual plate so that you will get an idea about how etch properly and how much pressure to be applied on the pen while etching.

Step 2

Wipe the metal plates with the lemon wipe (included) to remove dust or any other substances from the plate for a better output.

Step 3

Place the metal plate on Jewelers block( not included) and draw straight-line on the plate to get your seed phrase of similar size, take the etching pen and hold it like the regular pen as per your comfort, make sure plate won’t move when you start etching repeat the process until each word has finished.

HOW TO ENGRAVE WITH ELECTRIC PEN

HOW TO USE

Step 1

It is recommended to practice engraving in other surfaces before starting with the actual plate so that you will get an idea about how to engrave properly and how much pressure to be applied on the pen while engraving.

Step 2

Unscrew your engraving pen and insert 2 AA batteries into it, insert the removed part from the engraver and tight it well .Wipe the metal plates with the lemon wipe (included) to remove dust or any other substances from the plate for a better output.

Step 3.

Place the metal plate on Jewelers block( not included) and draw straight-line on the plate to get your seed phrase of similar size, start the Engraver by pressing the on/off button located on the grip side and start engraving, make sure plate won’t move when you start engraving, repeat the process until each word has finished.

NOTE

To add another layer of security to your backup plates. Insert the metal plate into the envelope (included) and stick it with the tamper sticker and store it in a safe place.

By this method you have successfully created an indestructible backup to your wallet.